Biodegradable Chemical Release Agent—BCA (C&CA) Category 4
Eurolease WB is a water soluble release agent ready to use, providing easy release from pre-cast moulds or formwork whilst providing an extremely high quality surface finish to con-crete. Offers an economical mould oil.
Eurolease WB is formulated with environmentally friendly components and is fully biodegradable according to OECD-301F. Eurolease WB is VC (Volatile Organic Compounds) free, making this product ideally suited to current and future Health & Safety legislation.
- Non-Hazardous
- Environmentally Friendly
- Size: 20, 205 & 1000 Ltr
Eurolease WB (Water Based Mould Oil)
• Eurolease WB is an eco-friendly release agent and is ready to use.
• Eurolease WB should be applied as finely and evenly as possible for
optimum performance to all types of formwork by spray, fine-haired
brush, swab or roller.
• Best results are achieved by using fine or airless spray systems
between 4 & 6 bar pressure. A nozzle size between 0.6 & 0.8mm
with an oval orifice will give opti-mum spray pattern.
• The nozzle should be approximately 40—80cm (16—30 inches) from the form face during application and an even coverage of the form face should be achieved, whilst taking care to not over apply.
• For new unsealed timber forms, pre-treatment is recommended with a second coat applied prior to use.
• Eurolease WB has been designed so a chemical reaction takes
place at the concrete interface, creating the releasing action.